Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 9)

Release Notes - SIP Application Changes
Copyright © 2007 Polycom, Inc. Page 3
2. Changes
2.1 Version 2.2.2
2.1.1 Added or Changed Features
• 35534: De-couple Presence Signaling from Idle Screen Soft-key UI
• 36931: Add support for SoundPoint IP 560 product.
• 37053: Add ability to make local contact directory read-only from the phone
• 38328: Add check for local contact directory changes during configuration
change checks
• 38357: Add ability to adjust the maximum brightness of the SoundPoint IP 550
and 650 phones.
• 38371: Allow for TCP keep-alive on SIP signaling TLS connections
• 38654:
Add support for SoundPoint IP 320 Part Number 2345-12200-005 and
SoundPoint IP 330 Part Number 2345-12200-004 for China market.
• 38888: Add ability to adjust the maximum brightness of SoundPoint IP Backlit
Expansion Modules.
2.1.2 Removed Features
• 38813: Remove 1000 half duplex as a valid ethernet configuration.
2.1.3 Corrections
• 34800: MWI Notify: Message Waiting Counts are ignored if "Messages-
Waiting" is set to "no"
• 35692: Functionality breaks down on pressing "conference>>cancel" soft keys
after transfer try is rejected. Phone reboots.
• 36566: Microbrowser: Left arrow when on first field in a form makes cursor
turn invisible
• 36786: Changing audio modes (e.g. handsfree to handset) during call set-up
mode may not work correctly in some circumstances.
• 37284: During a Blind Transfer the phone should terminate the call on receipt
of a 180 Ringing Response.
• 37313: RTP packet size incorrect when SRTP authentication turned off
• 37316: Authentication failing when phones have different payload size
• 37334: Disabling CDP from the phone menu causes an unnecessary reboot
• 37709: SoundPoint IP 330/320 phones using the idle micro-browser may re-
boot after several days due to low memory.
• 38112: Logging message indicates that default cert bundle in use when
custom only has been selected.