Panasonic KX-FLB756AL - Manual (Page 73)

73
Operations
When I exit Multi-Function Station, the
[Multi-Function Viewer] window does not
close.
● The [Multi-Function Viewer] window can
be operated separately. Click the [X]
button to close the window.
I cannot scan.
● When scanning at a high resolution, a
large amount of available memory is
required. If your PC warns of insufficient
memory, close all other applications and
try again.
● The fax machine is in use. Try again later.
● There is not enough space on the hard
disk. Delete unnecessary files and try
again.
● Restart the PC, and try again.
● Check the connection of the PC and the
fax machine (p. 51).
● You attempted to scan a document longer
than the paper size which you set in the
[Panasonic FLM551/FLB751 Series]
dialogue box. Change the setting or divide
the document into the appropriate paper
size, and try again.
The document does not feed into the fax
machine.
● Remove the document and reinsert it.
Even after clicking [Cancel], scanning
continues.
● Please wait. It may take a while for the
cancel request to be accepted.
Multi-Function Station does not work
properly.
● Click the [X] button to exit Multi-Function
Station, and restart. If Multi-Function
Station still does not close, restart the PC.
● If you connect the USB cable to USB hub,
connect it to the USB port of your
computer directly.
● Confirm the BIOS setting of your
computer. For parallel connection, select
ECP, Bi-directional or an equivalent
parallel port mode. For USB connection,
select USB port mode. Please refer to
your PC operating instructions or consult
the manufacturer.
● If you have any other multifunction
softwares installed on your computer,
uninstall them.
I want to replace the parallel cable with a
USB cable and vice versa.
● You must change the printer properties.
1. Replace the cables.
2. Set the connection type (parallel or
USB) by using the fax machine
according to the cable type you use
(feature #15 on page 63).
3. Click [Start], point to [Settings], then
click [Printers].
4. Right-click [Panasonic FLM551/
FLB751 Series] and click [Properties].
— The [Panasonic FLM551/FLB751
Series Properties] dialogue box will
appear.
5. Click the [Details] (Windows 98/Me) /
[Ports] (Windows 2000/XP) tab, select
the connection type, then click [OK].
— If Multi-Function Station does not
work correctly, uninstall the software,
then re-install it.
Note for Australian users:
● Panasonic Australia operates a toll free
Customer Care Centre. Please call
132600 for assistance.
Or visit the website www.panasonic
<http://www.panasonic.com.au>.
Note for New Zealand users:
● Panasonic New Zealand operates a toll
free Customer Support Centre. Please call
0800-Panasonic (0800-726276) for
assistance.
If a power failure occurs !
● The unit will not function.
● The unit is not designed for making
emergency telephone calls when the power
fails. Alternative arrangements should be
made for access to emergency services.
● Fax transmission and reception will be
interrupted.
● If any fax documents are stored in the
memory, they will be lost. When power is
restored, a power down report will be
printed out stating which contents in the
memory have been erased.