Panasonic KX-TS730AZ - Manual (Page 17)

Caller ID Service
17
Using Caller ID service
This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to
your telephone company’s Caller ID
service.
For New Zealand users
For all local and national incoming calls,
your display will show the area code (e.g.
09 for Auckland) or the cellular prefix (e.g.
027 for Telecom Cellular) followed by the
caller’s phone number. An Auckland
caller’s number will be displayed as
09XXXXXXX. The 7 X’s represent the 7
digits of the caller’s phone number. A caller
from a 7-digit Telecom Cellular number will
be displayed as 027XXXXXXX. For
incoming international calls, your display
may only show “0000”. For business users
on a Centrex line, your display will show
Centrex extension numbers in the shorter
extension number format used within your
company.
Using toll services from Telecom or
another company
Your telephone company may charge you
for a local call if the number dialled has the
area code prefix included. If this is
unacceptable, dial only the 7-digit local
number. Do not dial the “0” prefix or the
area code.
Caller ID features
When an outside call is being received, the
calling party’s telephone number will be
displayed.
Phone numbers for the last 50 different
callers will be logged in the caller list,
allowing you to return missed calls. Caller
information is stored by the most recent
call to the oldest.
L
When Caller ID information is received
and it matches a phone number stored
in the phonebook, the stored name will
be displayed and logged in the caller list.
(Private name display)
L
If the unit cannot receive caller
information, the following will be
displayed:
“Out of area”: The caller dialled from
an area which does not provide Caller ID
service.
“Private caller”: The caller
requested not to send caller information.
L If the unit is connected to a PBX system,
caller information may not be received
properly. Consult your PBX supplier.
L If the name display service is available
your area, the display will show caller
names. For further information, please
contact your telephone company.
For Caller ID Type II users (For
Australian users only)
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or
muted for a short period of time. This is
not a fault of the product as these events
are normal.
L
The tones are generated by the
telephone company.
TS730AZ.book 17 ページ ２００５年１１月９日 水曜日 午後４時３４分