Powercom 400 - Manual (Page 7)

7
This unit can be installed besides the computer or equipment, do not install it
in non-ventilated areas.
3.2 Unpacking
The following items are included in the carton
l User’s manual.
l Power cord.
l UPS
3.3 Connecting the UPS
For UPS series: Use the power cord to connect the wall power (utility power)
and inlet socket. Connecting the power cord of your computer to the UPS
output receptacle.
3.4 Staring operation
3.4.1 Turn on the UPS by pressing switch on rear panel to “ON” position, the
LED will light up, if the line voltage is absent, the LED will be slowly