Philips DCM580 - Manual (Page 16)

17
11 Product
information
Note
Product information is subject to change ‡
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output
Power 140 W RMS
Frequency
Response 100 Hz - 16 kHz, ±3 dB
Signal to Noise
Ratio >70dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion <1%
Frequency
Response 60Hz -16kHz (44.1kHz)
S/N Ratio >65dBA
Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
If the timer is activated, the display
»
shows .
If the timer is deactivated,
»
disappears on the display.
Note
If CD/USB/iPhone/iPod source is selected but ‡
the device is not available, tuner is activated
automatically.
Listen to an external device
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select MP3 link
source.
2
Connect the supplied MP3 link cable to:
the ‡ MP3 LINK jack on this unit
the headphone jack on the device ‡
3
Start to play the device. (See the device
user manual).
Turn on or off the light effect
1
In standby mode, press and hold
PRESET + on the main unit for more
than 4 seconds to turn on or off the light
effect.
English
EN