Planet Technology WGS3-404 - Manual (Page 95)

WGS3 Layer 3 Switch User’s Manual - 87 -
NOTE: Use the <Next Page> and <Prev Page> buttons to scroll through the static route table. To
display a specific page, set the page number in the Page field and then press <Apply>. To
modify a static route, highlight the entry in the table and press Enter. To add a static route,
press <Add>.
The following screen is displayed for modifying or adding a static route. You must provide route
information as described in the preceding table, plus the routing metric used to indicate the number of
hops to the destination network.