Philco PVD2000 - Manual (Page 21)

DVD Functions
EN – 21 –
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
B
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 20.
C
4
Select the desired item .
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
BITSTREAM
5
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”,
so that black bars may
appear on the top and
bottom of the screen.
• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.
• Select “16:9 WIDE” if a
wide-screen TV is
connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the best
resolution setting (FRAME
or FIELD) based on the
data characteristics of the
pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on the
TV screen is called a “frame”,
which consists of two separate
images called as “field”.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
date characteristics.
4
Select the desired item.
DISPLAY menu
AUDIO menu
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint on the right.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
OFF
ON
BITSTREAM
ENTER ENTER ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back a
96kHz disc with the copy-
right protection, or when
Virtual Surround is set to
“1” or “2”, the sound will be
down sampled at 48kHz
and output as digital audio
even if the “DOWN SAM-
PLING” is set to “OFF”.
• This function is available
only on digital output-
ting of a disc recorded in
96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE 4:3 LETTER BOX
AUTO
OFF
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
or
or
6
To exit the menu
SETUP
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select the
desired
setting.
or
Select the
desired
setting.
or
SETUP
Hint
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” in the DISPLAY menu
or press and hold [PLAY B]
on the front of the unit for
more than 5 seconds during
playback, until the P-SCAN
indicator light on the front
panel turns off.
• When “PROGRESSIVE”
is “ON”, video signals from
the unit’s VIDEO OUT and
S-VIDEO OUT jacks will be
distorted or not be output at all.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF 4:3 LETTER BOX
AUTO
ON
ENTER ENTER ENTER
SETUP
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
A c t i va t e P r o gr e s s i ve ?
SELECT: K / L SET:ENTER
NO
YES
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT: K / L SET:ENTER
Select “Yes”.
ENTER ENTER ENTER
If there is no picture
or you do not press
any buttons for 15
seconds, Progressive
scan will switch to
“OFF” and it will exit
the setup menu.
or
or
PROGRESSIVE: QUICK
(Default: OFF)
See Hint on the left.
6
To exit the TV ASPECT
or STILL MODE screen
To complete the
PROGRESSIVE setting
ENTER ENTER ENTER
Hint
• In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
“PROGRESSIVE”, or “DOLBY
DIGITAL” are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
QUICK mark, You can make all
settings in CUSTOM Menu.
Hint
• In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
“PROGRESSIVE”, or “DOLBY
DIGITAL” are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
QUICK mark, You can make all
settings in CUSTOM Menu.