Philips DCM109 - Manual (Page 20)

20
Program radio stations
manually
Note
You can program a maximum of 20 preset •
radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
[PROG] (program) blinks on the
»
display.
3
Press ALB/PRESET -/+ to allocate a
number (1 to 20) to this radio station,
then press PROG to confirm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1
Press ALB/PRESET -/+ to select a preset
number.
Tip
Make sure the FM antenna is fixed to the main •
unit.
Position the antenna as far as possible from
•
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
9 Listen to radio
Tune to a radio station
1
Press TUN to select FM.
2
Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/ repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset •
radio stations.
1
In the tuner mode, press and hold PROG
for 2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed.
»
All available stations are programmed
»
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
EN