Paradyne IP Broadband Loop Carrier 4000E User Manual
Page 10
Advertising
![background image](/manuals/188401/10/background.png)
10
July
2005
IPD4-A2-GZ40-10
4. Select a terminal block. Using a Phillips Screwdriver, remove the upper screw
from the chosen terminal block (labeled "+" on the chassis). Slide the ring
terminal of your positive power lead around the shaft of the screw and insert
the screw into the same "+" terminal from which it was removed.
DC Terminal Blocks
Ring
Terminal
POSITIVE
POWER LEAD
DC POWER
TERMINAL
Positive (+)
Terminal
Advertising