Philips 7183XL - Manual (Page 10)

ENGLISH 19
Storage
◗ Be sure razor is turned off. Remove cord from
outlet and razor before storing in a safe, dry
location where it will not be crushed, banged,
or subject to damage.
◗ Do not wrap cord around razor when storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor permanently plugged into
outlet.
◗ Do not place or store razor where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C
◗ Put the Protective Razor Head Cap on razor
to protect heads.
Assistance
◗ For assistance, call toll free:
1-800-243-3050 or visit our website:
www.philips.com/norelco
◗ Information is available 24 hours a day, 7 days
a week.
ENGLISH 18
8 Replace the frame.
C
9 Press down (1) and turn the black
3-pronged locking bracket clockwise (2)
until it locks into place.
10 Close the Razor Head Assembly.
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. rubbing alcohol) and lubricated with one drop
of mineral oil (in the center of the head). This
helps prevent wear of the shaving heads.
After Each Use: Trimmer
1 Turn razor OFF.
2 Push down spring-release trimmer switch.
C
3 Clean trimmer with the brush every time
you use it.
C
4 Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.
5 Close trimmer by pressing trimmer down.
This razor has no other user-serviceable parts.
Any other service should be performed by the
Philips Norelco Service Location.