Panasonic DVD-RP56 - Manual (Page 5)

5
Getting started
RQT6012
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
º
How to hold a disc
Do not touch the recorded surface.
º If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
º
If the disc is brought from a cold to a warm
environment, moisture may form on the disc
Wipe with a soft, dry, lint-free cloth before using the disc.
º
Handling precautions
³ Do not write on the label side with a ball-point pen or other writing
instrument.
³ Do not use record cleaning sprays, benzine, thinner, static electric-
ity prevention liquids or any other solvent.
³ Do not attach labels or stickers to discs. (Do not use discs with ex-
posed adhesive from tape or left over peeled-off stickers.)
³ Do not use scratch-proof protectors or covers.
³ Do not use discs printed with label printers available on the market.
º Do not place or store discs in the following
places
³ Locations exposed to direct sunlight
³ Humid or dusty locations
³ Locations directly exposed to a heat vent or heating appliance
30
°
30
°
The remote control
Batteries
³ Insert so the poles ( i and j ) match those in the remote control.
³ Do not use rechargeable type batteries.
Do not;
³ mix old and new batteries.
³ use different types at the same time.
³ heat or expose to flame.
³ take apart or short circuit.
³ attempt to recharge alkaline or manganese batteries.
³ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
held close to the front panel.
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
³ Keep the transmission window and the unit’s sensor free from dust.
³ Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not;
³ put heavy objects on the remote control.
³ take the remote control apart.
³ spill liquids onto the remote control.
Remote control signal sensor
7 m (23 feet)
R6, AA
1
2