Panasonic DP-2500 - Manual (Page 66)

66
Troubleshooting
Before Calling Service
Check Action
Unit Does Not Operate
Does the display light?
Check if the Power Switch is turned ON
and if the power cord is inserted into the
outlet.
Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 32)
Press Energy Saver key on the control
panel.
Perform actions in accordance with each
message.
Does any of the U## codes and messages
appear on the display?
(U0, U4, U10, U12, U13....etc.,)
Add Staples (See page 52)
Remove all jammed staples. (See page 54) Does the Add Staples indicator and
message appear on the display?
Add paper. (See page 55)
Does the Add Paper indicator and
message appear on the display? (
J )
Remove the misfed paper. (See page 58)
Does the paper misfeed indicator and
message appear on the display? (
c / I / F )
Turn the copier OFF, then ON. If the error
code does not clear, call your Service
provider.
Does E#-## indicator and message appear
on the display?