Panasonic KX-TG2432AL - Manual (Page 54)

Useful Information
54
Making/answering calls, Intercom
Problem Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units. L Move the handset and the base unit away from other
electrical appliances.
L Move closer to the base unit.
L
Raise the base unit antenna.
L
Turn on the clarity booster feature (page 20).
L If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your ADSL provider for details.
The handset does not
ring. L The ringer volume is turned off. Adjust it (page 32).
I cannot make a call.
L
If the base unit (including answering system) or the
other handset is in use, you may not be able to make a
call. Try again later.
L
While listening to messages using the handset, you
cannot make a call. Exit by pressing {OFF}.
L Dial lock is turned on. To turn it off, see page 36.
L
If the above remedies do not solve the problem, set the
dialling mode. Press {MENU} {0} {5} {1} {Save}
{
OFF}.
L
The unit is not designed to be used with rotary (pulse
dialling) services.
I cannot redial by
pressing {REDIAL}.
L
If the last number dialled was more than 48 digits long,
the number will not be redialled correctly.
L
If you press {REDIAL} after you have started dialling,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
L
Dial lock is turned on. To turn it off, see page 36.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is connected
properly (page 49).
L
If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
L Use only the Panasonic KX-TCA88AL headset.
I cannot page the
handset or base unit. L The called handset is too far from the base unit.
L
The called unit is in use. Try again later.
TG2431AL_2432AL(e).book Page 54 Tuesday, March 15, 2005 6:48 PM