Paxar 9855 RFID - Manual (Page 5)

3
U s i n g t h e C o n t r o l P a n e l
The control panel has a two-line LCD display, two
status lights, and five buttons. The control panel
displays error codes/messages, and allows you to
setup/configure the printer.
Pow er: The printer shows a steady green
light when it is on.
Fault: The printer shows a steady amber
light when it is out of labels or
ribbon, or when you have a supply
jam.
Feed/Cut: Prints a label in the on-demand
mode, feeds a blank label if there is
no print job, and prints a label with
error information that is useful to
your System Administrator if an error is displayed. When the
printer is offline, changes the displayed value by one or ten.
Enter/Pause: Pauses the current print job or resumes a paused print job.
Selects the displayed menu item.
Escape/Clear: When an error is present, clears the error. When a job (batch) is
printing, cancels the print job (batch). Enters the offline menu
mode or returns the display to the next higher menu.
Å Displays the previous menu item.
Æ Displays the next menu item.
Å and Æ Prints a test label when you press the buttons at the same time.
Hold for one second and release.