Panasonic AG-DVC80 - Manual (Page 43)

43
Setting menus
The underlining indicates the factory setting.
AV IN/OUT SETUP screen
Item/
(display mode)
Description of settings
A DUB INPUT
(VCR) For selecting the sound which is to be
recorded when audio dubbing is performed.
MIC: The sound from the internal microphone
or the sound from the external
components connected to the INPUT 1
and 2 connectors is recorded. (The
sound is selected using the CH1 SELECT
switch and CH2 SELECT switch.)
A_IN: The sound of the audio component
connected to the AUDIO IN/OUT
connectors (pin jacks) is recorded.
<Note>
If audio dubbing is performed when the
sound has been recorded in the 16-bit
audio mode, the sound will be recorded
over the sound heard during shooting.
DV OUT
(VCR) For setting the function, which converts the
analog signals which have been input into
digital signals and outputs them from the
DV connector, to ON or OFF.
OFF
ON
DISPLAY SETUP screen
Item/
(display mode)
Description of settings
ZEBRA DETECT
(Camera) For setting the level of the zebra pattern
leaning to the left and displayed in the
viewfinder and on the LCD monitor.
80%, 85%, 90%, 95%, 100%
DATE/TIME
(Camera)
(VCR) For setting the date and/or time to be
displayed in the viewfinder, on the LCD
monitor and in the video output signals.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
Both the date and time are displayed.
O When a setting other than OFF is
selected, the date and/or time are
displayed in the video output signals
regardless of the setting selected for the
VIDEO OUT OSD item.
LEVEL METER
(Camera)
(VCR) For setting the audio level meter display to
ON or OFF.
OFF
ON
TAPE•BATTERY
(Camera)
(VCR) For setting the remaining tape amount and
remaining battery charge displays to ON or
OFF.
OFF
ON
OTHER
DISPLAY
(Camera)
(VCR) For setting the amount of information to be
displayed in the viewfinder and on the LCD
monitor. (See page 48)
OFF, PARTIAL, ALL
VIDEO OUT OSD
(Camera)
(VCR) When ON is set, the information displayed
in the viewfinder and on the LCD monitor is
output as the video output signal together
with the images.
ON
OFF
LCD
BACKLIGHT
(Camera)
(VCR) For adjusting the backlight of the LCD
monitor.
When HI is set, the monitor becomes
brighter than usual.
HI
NORMAL
LCD/EVF SET
(Camera)
(VCR) For adjusting the display level of the
viewfinder and LCD monitor images.
LCD BRIGHTNESS:
The brightness of the LCD monitor’s
images is adjusted.
LCD COLOR LEVEL:
The color level of the LCD monitor’s
images is adjusted.
EVF BRIGHTNESS:
The brightness of the viewfinder’s
images is adjusted.
SELF SHOOT
(Camera) For selecting the LCD monitor’s mirror
function for face-to-face shooting. When
MIRROR is set, the image on the LCD
monitor is reversed at the left and right for
display during face-to-face shooting.
NORMAL
MIRROR