ProForm PFCCEL1305.0 - Manual (Page 22)

22
Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately.
For smooth
operation of the
elliptical exer-
ciser,
inspect
and clean the
ramp regularly
using a soft
cloth and mild
detergent.
Other parts of
the elliptical
exerciser can
also be
cleaned in this way.
Keep liquids off the console.
Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper-
ly, see step 5 on page 14.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser rocks
slightly on your
floor, turn one
or both of the
leveling feet
under the front
stabilizer until
the rocking
motion is elimi-
nated.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han-
dlebars firmly, and place one foot against the ramp in
the location shown below. Pull the handlebars until
the elliptical exerciser can be moved on the front
wheels, and carefully move the elliptical exerciser to
the desired location. Then, place one foot against the
ramp, and lower the elliptical exerciser.
Due to the
size and weight of the elliptical exerciser, use
extreme caution while moving and lowering it.
CD PLAYER TROUBLESHOOTING
If the CD player stops working or fails to respond,
unplug the power cord and then plug it back in.
MAINTENANCE AND TROUBLESHOOTING
Ramp
Leveling
Foot
Place your
foot here
Handlebars
Wheel