Pride Mobility Revo - Manual (Page 33)

33 www.pridemobility.com Revo
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figures 17 and 17A.
2. Secure the toggle latch buckle over the top of the toggle latch. See figure 17B.
3. Grab the hand grip on the tiller, loosen the tiller adjustment knob, and gently lower the tiller down to the
center of the scooter floorboard.
4. Fully tighten the tiller adjustment knob.
Frame Separation
1. Push back on the seat post to pivot the scooter’s
rear section rearwards until it is standing vertically
on its rear bumper. See figure 18.
2. Lift the front section up until the rear pegs are no
longer in the locking brackets. See figure 19.
3. Carefully move the front section away from the rear
section.
PEGS
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
Figure 18. Frame Positioning
Figure 19. Frame Separation
Figure 17. Toggle Latch (Latched) Figure 17A. Toggle Latch (Unlatched) Figure 17B. Toggle Latch (Secured
For Disassembly)
LOCKING
BRACKETS
TOGGLE LATCH BUCKLE
TOGGLE LATCH
TOGGLE LATCH
RELEASE BUTTON