Pioneer VSX-409RDS - Manual (Page 33)

33
Operation
Making a Recording
Making a Video Recording
The following steps show you how to make a video recording from a video source connected to the receiver,
such as a DVD player, LD player, etc., to a video deck connected to the VCR/DVR connectors.
The receiver's volume, channel levels, tone (bass, treble), S. bass, and surround effects (Dolby
Pro Logic and DSP settings) have no effect on the recorded audio signal.
CLASS
MENU
MPX
SET UP
D. ACCESS
TOP MENU
SOURCE
SOURCE SELECT
DVD
TAPE
CD TUNER
TV CONT.
CH. SELECT
FUNCTION FL
DIMMER RECEIVER
MD CD-R
* & # @
TV VOL.
EFFECT
TV FUNC.
TEST
TONE
MUTING
MASTER
VOLUME
DSP MODE SORROUND 2
! !
Î AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
LEVEL
CHANNEL
STATION
$ $
ENTER
RF ATT DISP
FQ
FQ
1 2 3 4
5 6
9 0
7 8
1
1
1 Press the FUNCTION button to select a
source to record.
On the receiver, select the source directly using the front panel
buttons.
2 Prepare the programme source.
Load the DVD, LD, etc.
3 Insert a blank tape or DVR into the VCR/DVR
and set the audio recording level (if
applicable).
Most video recorders set the audio recording level automatically—
check your video's instruction manual if you are unsure whether
yours has manual controls.
4 Start recording on the VCR/DVR, then start
playback from the source component.
memo