Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 104)

1 Select the repeat range.
= For details, refer to Repeating play on the
previous page
2 Touch [Scan] in Function menu.
Touching [ Scan] switches between [On] and
[ Off].
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
3 When you find the desired track (or
folder) touch [Scan] to turn scan play off.
p After track or folder scanning is finished,
normal playback of the tracks will begin
again.
XM Tuner
Listening to XM Satellite Radio
All CH Mode
3 2 4
7
5 6 1
Category Mode
8
You can use the navigation system to control
an XM satellite digital tuner (e.g. GEX-
P10XMT), which is sold separately.
For details concerning operation, refer to the
XM tuner
’s operation manuals. This section
provides information on XM operations with
navigation system which differs from that de-
scribed in the XM tuner
’s operation manual.
Only the logo data that is contained in the na-
vigation DVD Map Disc can be displayed for
each channel. The icon of a newly established
channel that is not contained in the disc can-
not be displayed. When no icon can be dis-
played, the following substitute icon is
displayed.
Substitute icon
p The logo data is not displayed during the
memory navi mode.
p The following functions are not available on
the GEX-P10XMT, GEX-P920XM.
— Switching the XM display
p The following functions are not available on
the GEX-P910XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM chan-
nel list display
p The following functions are not available on
the GEX-P900XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM chan-
nel list display
— Selecting an XM channel directly
1 Source icon
2 XM band indicator
3 XM preset number indicator
4 XM channel number indicator
5 XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in
All CH Mode (or
CH Number Mode), and select a channel
from a selected category in
Category Mode.
Using the AV Source (Pioneer AV Equipment)
En
104
Chapter
08