Pioneer DVJ-1000 - Manual (Page 27)

INDEX Preparations (Setup) Preparations (Setup)
English
25
<DRB1416> En
Adjusting picture quality
1. Use the four sides of the cursor button ( / / / )
to select [Video2] \ [Video Adjust] \ [Start],
then press the ENTER button.
The Picture Quality Controls menu will appear.
2. Use the cursor button’s up/down sides ( / ) to
select [Video Setup] and press the ENTER button.
Video Memory Select
Video Setup
3. Use the cursor button’s up/down sides ( / ) to
select the item you wish to adjust.
DISPLAY ENTER
Fine Focus On Off
Move Select Check
When the DISPLAY button is pressed, a submenu list of the
selected adjustment items will be displayed. Press the DIS-
PLAY button once again to return to the previous menu.
Memory
Fine Focus
Contrast
Sharpness
Chroma Level
Hue On Off
soft fine
min max
min max
green red
Off 1 2 3
Fine Focus:
Set to [On] to reproduce high-resolution images.
Contrast:
Use to adjust the ratio between the brightest and darkest parts
of the image.
Sharpness:
Use to adjust the image brightness with respect to the middle
frequency range. This function is disabled when [Fine Focus] is
set to [On].
Chroma Level:
Use to adjust the depth of color. This function is particularly ef-
fective when watching heavily colored animations.
Hue:
Use to adjust the red-green balance.
4. Use the cursor button’s left/right sides ( / ) to
adjust the selected item’s level.
When setting [Fine Focus], select between [On] or [Off].
5. Repeat steps 3 and 4 for all desired setting items.
If you wish to record the selected settings in memory, use
the cursor button’s up/down sides ( / ) to select [Memory],
then use the cursor button’s left/right ( / ) sides to select
[1], [2], or [3] to record the combination of settings in the cor-
responding memory space.
• If a combination of settings has previously been memo-
rized in the selected memory space, the previous settings
will be overwritten (erased) by the new settings.
DISPLAY ENTER
Memory
Move Select
Off 1 2 3
Check
6. Press the ENTER button.
The Picture Quality Controls menu will close.
• The effect of picture quality control changes may not appear
as distinct with some DVDs and on some television sets.
[Video2] settings
¶ See P.20 for menu instructions.
Select Background
Select the kind of background that appears when disc is stopped.
—
SETUP
Video2 A2 Language General Audio1 V1
Exit Move
Background
Video Adjust
Pioneer Logo
Black
Put Background Selections
Pioneer Logo:
The Pioneer Logo mark appears as background when disc is
stopped (factory default setting).
Black:
Background appears black when disc is stopped.
Still Picture selection (Expert Mode)
Use to eliminate image shaking when viewing still images (DVD
pause mode), and produce a clearer picture.
¶ Some discs may not appear clearer even when [Field] is se-
lected.
—
—
Video2 A2 Language General Audio1 V1
Exit Move
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Pioneer Logo
Field
Frame
Auto
SETUP
Field:
Eliminates shaking during still images.
Frame:
Normal mode.
Auto:
Switches automatically between [Field] and [Frame] (factory de-
fault setting).
¶ Automatically defaults to [Auto] in DJ mode.