Pioneer AVIC-Z3 - Manual (Page 153)

2 Touch [5.1Ch Setup] in the System Set-
tings menu.
If you touch [
5.1Ch Setup], it will be turned
[ On]. If you touch [5.1Ch Setup] again to turn
[ Off] the setting, [5.1Ch Setup] will disappear.
If you want to turn it [ On] again, you have to
repeat the procedure from the Step1.
Other Functions
Selecting the video for
“Rear
display
”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the
“Rear display”.
1 Press AV button to switch Audio opera-
tion screen.
2 Touch the source icon and then touch
[REAR SCREEN].
Each touch of [ REAR SCREEN] changes the
settings as follows:
! MIRROR — The video on the front screen of
the navigation unit is output to the
“Rear
display
”
! DVD — The video and sound of the DVDs
are output to the
“Rear display”
! AV — The video and sound of AV INPUT
are output to the
“Rear display”
p When MIRROR is selected, the following re-
strictions are applied to
“Rear display”.
— When the TV tuner is connected with
AV-BUS, its
“Video image” cannot be
output. (Connect the TV tuner
’s rear out-
put to
“Rear display” directly.)
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear
display
”.
— There is no picture on “Rear display”
while [ Picture Adjust] for
[ Back-Camera] is carried out.
— The map screen navigation images out-
put to the
“Rear display” differ from
standard NTSC format images. There-
fore, their quality will be inferior to the
images that appear on the front screen.
p When DVD is selected, the following re-
strictions are applied to
“Rear display”.
— When a CD or MP3 disc is set in the
built-in DVD drive, nothing is output.
p When AV is selected, the following restric-
tions are applied to
“Rear display”.
— The “Video image” and sound are output
only when AV INPUT has both video and
sound.
— The “Video image” and sound are output
only when the appropriate setting on
[
AV Input] is [Video].
Operating the picture adjustment
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the parking brake (refer to
To ensure safe driving on page 22).
You can adjust the picture for each source and
rear view camera.
1 Press V button to display Picture Adjust
screen.
! Brightness — Adjusts the black intensity
! Contrast — Adjusts the contrast
! Color — Adjusts the color saturation
Customizing the Audio Setting related with Audio Visual
En
153
Chapter
17
Customizing
the
Audio
Setting
related
with
Audio
Vi
sual