Promise Technology VTrack M-Class M300f User Manual
Page 30
VTrak M-Class Quick Start Guide
30
you can create multiple logical drives at the same time you create your disk array.
However, all of the logical drives will be the same size and RAID level.
If you prefer to specific the parameters directly, use the Advanced option to
create your disk array.
If you are uncertain about choosing parameters for your disk array, use the
Automatic option.
Follow these steps to create a new disk array.
1.
Check the boxes to select any one or a combination of:
•
Redundancy – The array will remain available if a physical drive fails
•
Capacity – The greatest possible amount of data capacity
•
Performance – The highest possible read/write speed
•
Spare Drive – A hot spare drive
2.
In the Number of Logical Drives field, enter the number of logical drives you
want to make from this disk array.