Panasonic CQ-SRX7000U - Manual (Page 39)

43
CQ-SRX7000U
1
E
N
G
L
I
S
H
34
1
2
3
4
❏ Installation Procedures
First, complete the electrical con-
nections, and then check them for
correctness. (
a page 46).
Insert Mounting Collar q into the dashboard,
and bend the mounting tabs out with a screw-
driver.
Secure the rear of the unit.
After fixing Mounting Bolt w and Power Connector
e, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
Insert Trim Plate t.
After installation
reconnect the nega-
tive battery
termi-
nal.
(a) Using the Rear Support Strap y
Fire Wall of Car
iHex. Nut
yRear Support Strap
wMounting Bolt
qMounting Collar
uTapping Screw
3 mmø
Rubber Cushion
(Option)
wMounting Bolt
qMounting Collar
Rear Support Bracket
(Provided on the car)
(b) Using the Rubber Cushion (Option)
Lock Lever
Mounting Tabs
Lock Lever
e Power Connector
w Mounting Bolt
Make sure that the lock lever is
flush with the mounting collar
(not projecting outward).
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.