Panasonic WS-AT250 - Manual (Page 9)

-9-
WS-AT200 WS-AT250
Type 2 Way, Bass-reflex type Bass–reflex type
Input impedance 8
Ω
Power capacity 300 W (continuous program input) 400W (RMS)
150 W (RMS) —
Sound Pressure Level 99 dB [1 W, 1m (3.3 ft)] 92 dB [1 W, 1m (3.3 ft)]
Max. Sound Pressure Level 121 dB [1m (3.3 ft)] 118 dB [1m (3.3 ft)]
Frequency response 70 Hz - 18 000 Hz 30 Hz - 1 400 Hz
Crossover frequency 2400 Hz —
Speaker
Woofer 30 cm (12”) cone speaker 30 cm (12”) cone speaker
Tweeter SCWG horn speaker —
Dispersion 90
°
(horizontal), 40
°
(vertical) —
Dimensions 394 (W) x 577 (H) x300 (D) mm [15-1/2” (W) x 22-3/4” (H) x 11-13/16” (D) ]
Weight 15 kg (33.1 lbs.)
Finish
Enclosure Resin molded, Blue black
Front panel Punched grille, Blue black
Standard accessories Eyebolt (M8 x 25) ........................................... 2
Operating Instructions .................................... 1
BLOCK DIAGRAM
SPECIFICATIONS
!
@
Phone jack
SPEAKON
Connector
Tweeter
Woofer
Tweeter
Protector
Woofer
Protector
HPF
LPF
!
@
Phone jack
SPEAKON
Connector
Woofer
WS-AT200
WS-AT250
• Dimensions and weight indicated are approximate.
• Specifications are subject to change without notice.
• True effective power measured by the test method prescribed by American National Standard EIA (Electronic Industries
Association), RS-426-A (1980).
In this test, the noise signal with a higher frequency power component was used to match the latest program sources.