Philips SHB9000 - Manual (Page 13)

1
E
N
G
L
IS
H
8 Using more of your
Bluetooth stereo headset
.1 Use with the audio cable
You can use your headset with non-Bluetooth
enabled devices or on airplanes (in which the
use of Bluetooth may be restricted) by taking
advantage of the headsets audio jack. Corded
operation does not require battery power
for music listening. The microphone and the
FullSound digital sound enhancement will not
work via the audio cable.
Finish your call before connecting the audio
jack, as this will switch off battery power and cut
an ongoing call.
Connect one end of the included audio cable to
the headsets audio jack and the other end to the
music devices headphone jack.
. Learn about the battery status
Immediately after turning the headset on, the
LED will indicate the battery status.
LED behaviour Battery status
3x red blinking Less than 25% battery
remaining
2x red blinking Less than 50% of charge
remaining
1x blue blinking 50% or more of charge
remaining
The LED will continuously flash red with about 5
minutes of talk time remaining. You will also hear
two short beeps every minute to remind you to
end the call or transfer it to your phone before
the battery runs out.
Mini USB
charging jack