Installing the mmg server on the gateway – Pinnacle Design Pinnacle Systems Media Stream Media Gateway 37T100105 User Manual
Page 27
Chapter 3: Installation and Setup
MMG Installation, Setup, and Operations Guide
27
Installing the MMG Server on the Gateway
To install the MMG server on the gateway:
1.
Insert the MMG installation disk into the gateway computer’s CD drive. Locate the MMG-
Server.exe and double-click it to start the installation.
2.
After the Welcome window is displayed, click Next to continue with the installation.
3.
The Ready to Install window is displayed. Click Install to begin the installation. If you want
to change any previous entries during the installation, click the Back button until you return
to the appropriate window. Make your changes and return to your previous location by
clicking Next. Click Cancel at any time to quit the installation.
4.
The ActivePerl setup window (Figure 3-21) is displayed. Click Next to start the installation.
Figure 3-21: ActivePerl Setup Window
5.
The license agreement is displayed. Select the terms of the agreement and click Next to
continue with the installation.
6.
Accept all default values for the ActivePerl installation. After the Setup window is displayed,
click Next.
Figure 3-22: ActivePerl Setup Window
7.
The New Features window is displayed. Click Next.
8.
The Choose Setup Options window is displayed. The first two options are selected by default.
Click Next.