How to use the elliptical exerciser – ProForm 831.28645.0 User Manual

Page 12

Advertising
background image

12

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO MOVE THE ELLIPTICAL EXERCISER

Due to the size and weight of the elliptical exercis-

er, moving it requires two persons. Stand in front of

the elliptical exerciser, hold the upright, and place one

foot against one of the front wheels. Pull on the upright

and have a second person lift the base until the ellipti-

cal exerciser will roll on the front wheels. Carefully

move the elliptical exerciser to the desired location,

and then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL EXERCISER

If the elliptical

exerciser

rocks slightly

on your floor

during use,

turn one or

both of the lev-

eling feet

beneath the

base or

beneath the front stabilizer until the rocking motion is

eliminated.

HOW TO EXERCISE ON THE ELLIPTICAL

EXERCISER

To mount the elliptical exerciser, hold the handlebars

and step onto the pedal that is in the lower position.

Then, step onto the other pedal. Push the pedals until

they begin to move with a continuous motion. Note:

The crank arm covers can turn in either direction.

It is recommended that you turn the crank arm

covers in the direction shown by the arrow below;

however, for variety, you can turn the crank arm

covers in the opposite direction.

To dismount the elliptical exerciser, wait until the ped-

als come to a complete stop. Note: The elliptical

exerciser does not have a free wheel; the pedals

will continue to move until the flywheel stops.

When the pedals are stationary, step off the higher

pedal first. Then, step off the lower pedal.

Place

your foot

here

Pull on

upright

Leveling

Feet

Lift here

Pedals

Crank Arm

Cover

Handlebars

Advertising