Polycom ETJ-16DC-2 - Manual

Wireless Telephone Quick Reference Guide
NEC NEAX
ETJ-16DC-2 Desk Set
1725-36155-001_E NEAX is a trademark of NEC Corporation For technical support, please contact
your facility’s Network Administrator.
Function Key
Strokes
Default
Settings
Fill In Your
Feature Settings
FCN + 1 MUTE
FCN + 2 TRF
FCN + 3 CNF
FCN + 4 LNR/SPD
FCN + 5 RECALL
FCN + 6
FCN + 7
FCN + 8
FCN + 9
FCN + 0 FCN
FCN + * EXIT MENUS
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer
second call
Press HOLD to put your current
call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
settings.
SpectraLink 6020 Wireless Telephone
The figure above shows the mapping of the ETJ-16DC-2
display set to the SpectraLink Wireless Telephone
Pressing LINE followed by a digit ( 1-9) on the Wireless
Telephone is equivalent to pressing one of the line keys
on the ETJ-16DC-2.
Pressing FCN followed by a digit ( 6-9) on the Wireless
Telephone is equivalent to pressing one of the four
programmable function keys on the desk set.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
ETJ-16DC-2 Desk Set