High pass filter, Adjusting source levels, Operating this unit – Pioneer DEH-P5900IB User Manual

Page 24: Using the high pass filter

Advertising
background image

2

Push MULTI-CONTROL up or down to

select a desired level.
0 to +6 is displayed as the level is increased or
decreased.

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.

1

Use MULTI-CONTROL to select HPF.

2

Press MULTI-CONTROL to turn high

pass filter on.
80Hz appears in the display. High pass filter is
now on.

# If the high pass filter has been previously ad-
justed, the frequency of that previously selected
will be displayed instead of

80Hz.

# To turn high pass filter off, press
MULTI-CONTROL again.

3

Push MULTI-CONTROL left or right to

select cut-off frequency.
Each time

MULTI-CONTROL is pushed left or

right, cut-off frequencies are selected in the
following order:
50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se-
lected range are outputted from the front or
rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume

level, which remains unchanged.

1

Compare the FM tuner volume level

with the level of the source you wish to ad-
just.

2

Use MULTI-CONTROL to select SLA.

3

Push MULTI-CONTROL up or down to

adjust the source volume.
Each time

MULTI-CONTROL is pushed up or

down, source volume increases or decreases.
SLA +4 to SLA

–4 is displayed as the source

volume is increased or decreased.

Notes

! The AM tuner volume level can also be ad-

justed with source level adjustments.

! The built-in CD player and the multi-CD player

are set to the same source level adjustment
volume automatically.

! XM tuner and SIRIUS tuner are set to the

same source level adjustment volume auto-
matically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume
automatically.

Operating this unit

En

24

Section

02

Advertising