Pioneer VSX-D914 - Manual (Page 37)

Listening to your system 06
37
En
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to
STEREO .
Choosing the input signal
• Default setting: AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
• Press SIGNAL SELECT on the front
panel to select the input signal corre-
sponding to the source component.
Each press cycles through the options as
follows:
• AUTO – This automatically switches to
DIGITAL if a digital source is detected,
otherwise it remains on ANALOG .
• DVD 5.1ch – Selects the multichannel
inputs (only appears when DVD/LD is
selected).
• ANALOG – Selects the analog inputs.
• DIGITAL – Selects the digital input.
When set to DIGITAL or AUTO , 2 DIGITAL
lights when a Dolby Digital signal is input,
and
DTS lights when a DTS signal is input.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (including DTS
96kHz/24 bit). With other digital signal
formats, set to
ANALOG .
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 17) and
set the signal input to
DIGITAL .
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
STATION STANDARD SPEAKERS
S-VIDEO DIGITAL IN SETUP MIC VIDEO L AUDIO R
ADVANCED
SURROUND STEREO/ DIRECT SIGNAL
SELECT MIDNIGHT/
LOUDNESS SB CH
MODE TUNING
LISTENING MODE
TONE QUICK SETUP
TUNER EDIT CLASS BAND MPX
MULTI JOG
INPUT ATT FL DIMMER
MCACC VIDEO INPUT
MULTI JOG
VSX_D912.book.fm 37 ページ ２００３年１２月５日 金曜日 午前９時４３分