For uhf reception, Set up a digital tuner with this antenna – Philips SDV6122/27 User Manual

Page 7

Advertising
background image

7

English

3

Tilt or swivel the UHF antenna towards the

transmitter until the reception is achieved.

Note

It is possible to turn the gain control knob down for

best reception.

Note

To check the distance from the local TV broadcast

transmitters to your location, visit www.antennaweb.

org for more information.

Set up a digital tuner with this

antenna

You can install available channels with the digital

TV tuner. This automatic process is part of the

setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive

viewable channels.
There are two ways to connect the antenna to

the TV:

Connect the antenna to a digital tuner.

If the signal strength is good enough, the

channels can be memorized in the tuner

automatically.
Connect the antenna directly to the TV.

Tune to the analogue channels and find

the best antenna location. Then re-

connect the antenna to the digital tuner.

Ensure the signal strength is good enough

before you install the channels with the

tuner.

3

Turn the TV or FM radio to the desired

channel/station. Move the dipoles in

different directions up and down until the

reception is achieved.

Note

It is possible to turn the gain control knob down for

best reception.

For UHF reception
1

Turn the TV to the desired channel/

station.

2

To turn the amplifier up, rotate the gain

control knob towards the max position.

Advertising
This manual is related to the following products: