Philips LX3600D/25 - Manual (Page 9)

9
English
3139 115 22612
Connections
Step 2: Connecting speakers
and subwoofer
~AC
MAINS FRONT RIGHT CENTER FRONT LEFT REAR RIGHT REAR LEFT SUB- W
SPEAKERS (4 )
AUX IN LINE OUT
AUDIO
L
R
L
R
Front
Right
Front
Left
Rear Right Rear Left
Centre
Connect the supplied speaker systems
using the fixed speaker cables by
matching the colours of the jacks and
speaker cables.
~AC
MAINS
FRONT RIGHT CENTER FRONT LEFT
SURR. RIGHT
SURR. LEFT SUB- W
SPEAKERS (4 )
Helpful Hints:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
– Do not connect speakers with an
impedance lower than the speakers supplied.
Please refer to the SPECIFICATIONS section
of this manual.
Subwoofer
You can choose to mount the speakers
on the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
– The surround speakers are labelled as
REAR L (left) or REAR R (right).
– The front speakers are labelled as FRONT
L (left) or FRONT R (right).
Step 1: Set up the speakers
001-041-LX36-22-Eng 21/08/2003, 9:43 AM 9