Sms feature (text message), Setting the pbx line access number, Turning the sms feature on/off – Panasonic KX-TCD535HK User Manual
Page 64
64
SMS Feature (Text Message)
Setting the PBX Line Access Number
This feature is only for the phones connected to a PBX. This allows you to delete
automatically the PBX line access number (max. 4 digits) when you enter the destination
phone number of an SMS outgoing message from Handset Phonebook, Redial or Caller
ID lists.
To exit the operation, press
at any time.
• The factory preset is no entry of line access number.
Turning the SMS Feature ON/OFF
To exit the operation, press
at any time.
• The factory preset is “On”.
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
5
Select “PBX Prefix”.
6
Select “On”.
7
Enter Line Access
Number.
(max. 4 digits)
8
Press JOYSTICK.
9
Select “Save”, then
“Saved” is displayed.
Follow steps 1 to 3 on the previous page, then:
4
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
5
Select “SMS On/Off”.
6
Select “On” or “Off”.
When the SMS feature is turned off;
•
If you send a message, a tone sounds and the message will return to the SMS incoming
list with “
FD
” attached.
•
If you receive from SMS centre call, the message will not be received but SMS centre
phone number will remain in the Caller ID list.