Proxim Tsunami MP.11 - Manual (Page 6)

Tsunami MP.11 Antenna Installation
Copyright © 2006 Proxim Wireless Corporation. All rights reserved. 6
ABOUT THE TSUNAMI MP.11 PRODUCT FAMILY
The Tsunami MP.11 models let you set up a wireless system based upon two basic topologies:
• A point-to-point link, which lets you set up a connection between two locations as an alternative to:
º Leased lines in building-to-building connections
º Wired Ethernet backbones between wireless access points in difficult-to-wire environments
• A single point-to-multipoint network, which lets you connect more than two buildings. You can set up a single
point-to-multipoint network with a single Base Station Unit and multiple Subscriber Units.
A link between two locations always consists of a Base Station Unit (BSU) and a Subscriber Unit (SU). A BSU
can, depending upon its configuration, connect to one or more SUs; an SU, however, can connect to only one
BSU.
Note: Depending upon local radio regulations and legislation, the outdoor antenna solutions described in this
document may not be available in all parts of the world.