Pioneer VSX-1018AH-K 7 - Manual (Page 64)

Other connections 08
64
En
Using the SR+ mode with a Pioneer flat
panel TV
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer flat panel TV even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the flat panel TV.
• Automatic volume muting on the flat panel TV.
See also SR+ Setup for Pioneer flat panel TVs on page 70
for more on setting up the receiver.
Important
• The SR+ features do not work when any of the iPod
USB, XM or SIRIUS Radio function is selected.
1 Make sure that the flat panel TV and this receiver
are switched on and that they are connected with the
SR+ cable.
See Using this receiver with a Pioneer flat panel TV on
page 63 for more on connecting these components.
• Make sure you have also selected the display input to
which you’ve connected the receiver in The Input
Setup menu on page 67.
2 To switch SR+ mode on/off, press RECEIVER, then
press the SR+ button.
The front panel display shows SR+ ON or SR+ OFF.
• The automatic video input switching and the
automatic volume muting features are enabled
separately; see SR+ Setup for Pioneer flat panel TVs on
page 70.
INPUT
1 2 3
SLEEP MCACC GENRE
4 5 6
A.ATT SBch SR+
7 8 9
CLASS
MASTER
VOLUME
CH LEVEL D.ACCESS
0 ENTER
SR+
7
TV CTRL
MAIN ZONE 2
ANT
AUDIO DISPLAY
MPX SIGNAL SEL
CH
RECEIVER
MEM
RECEIVER
VSX-1018AH_KU.book 64 ページ ２００８年４月１７日 木曜日 午後２時３７分