Panasonic DMC-LC43PP - Manual (Page 71)

Technical use
71
Formatting the Card
Usually, it is not necessary to format the card
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR”.
• If the card has been formatted by a PC or
other equipment, format the card on the
camera again.
[Preparation]
• Set the mode dial to playback [ ]. (P23)
1 Press the [MENU] button.
2 Press 3/4 to select [FORMAT] and
then press 1.
3 When this message is displayed
“DELETE ALL DATA ON THE MEMORY
CARD?”, press
2/1 to select [YES].
4 Press the 4/[REVIEW/SET] button.
• The card is formatted.
• After formatting, recorded images and
any other data cannot be recovered.
• When formatting, use the batteries which the remaining power is enough or AC
adaptor (optional, DMW-AC1).
• During formatting, do not turn the power off.
• If the card cannot be formatted, consult your dealer.
1 2,3,4
SETUP PLAY2/2
SELECT SET EXIT MENU
2
TRIMMING
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
FORMAT
YES NO
SELECT SET
3
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
KC93-PP.book 71 ページ ２００３年３月１９日 水曜日 午後２時１１分