Planet Technology VIP-150T - Manual (Page 15)

PLANET VIP-150T User’s Manual 12
Select SIP connection mode to be peer-to-peer mode or Proxy mode.
(2) Proxy
A. Proxy
Set Proxy IP address or Domain Name.
B. Outbound proxy
Set Outbound Proxy IP address or Domain Name.
C. Proxy port
Set Proxy port for VIP-150T to send messages.
D. Expire (in seconds)
Set expire time of registration, in the duration of 2/3 expire time,
VIP-150T will re-register to Proxy Server again.
(3) User Info
A. User Name
Set User Name of VIP-150T to register to Proxy Server. If Proxy
server doesn
’t request specific User name, please enter Line
number here.
B. Line Number
Set Line Number of VIP-150T to register to Proxy Server.
C. Password
Set User Password of VIP-150T to register to Proxy Server. This
configuration is not necessary, if Proxy server doesn
’t request
client to set password, user only has to set User Name the same
as Line Number.
2. Firmware Update
(1) Download method
There are two methods to download new version file, please move the
“>“ symbol by press ç or è on the keypad to select TFTP or FTP
method, then press OK to confirm it.
(2) FTP/TFTP Sever
User has to offer one TFTP/FTP server IP Address and set this IP
Address via keypad. The IP Address is necessary for upgrading
VIP-150T new application rom file.
(3) Set FTP user account (**)
User has to input user name and password for FTP server login .It is
necessary for upgrading VIP-150T new application rom file via FTP
method.
(4) File Name
User has to press the file name of new application rom file prepared for
upgrading