Assembly – Poulan 420077 User Manual

Page 12

Advertising
background image

12

ASSEMBLY

INSTALLING WHEEL ASSEMBLY

See Figure 5.

■

Locate the following items:

2

wheels

2 square curved washers (14)

2 flat washers (4)

2 hex nuts (11)

2 nuts (6)

■

Slide wheel over axle extension.

■

Slide flat washer on axle extension.

■

Install hex nut on axle extension and tighten to

secure.

■

Repeat for second wheel.

NOTE: Block up frame securely with wood blocks to

provide clearance for frame bolts & wheel assembly.

■

Slide square curved washer, curved side down,

on

bolt.

■

Place on frame and slide bolt through frame

hole.

■

Repeat for second bolt.

■

Lift axle and align hole with installed frame bolts.

■

Install nuts on 2 bolts and tighten to secure

INSTALLING FOOT ASSEMBLY

See Figure 6.

■

Locate the following items:

2 foot supports (12)

6 bolts (13)

NOTE: Block up frame securely with wood blocks to

provide clearance for foot support assembly.

■

Align foot support with 3 holes in frame cross member.

■

Insert 3 bolts into welded nuts on foot support.

■

Tighten bolts to secure

■

Repeat for second foot.

Fig. 6

Fig. 5

Advertising