Polycom RMX 1000 - Manual (Page 36)

Polycom RMX 1000 User Guide
3-9
The table below shows the strings dialed by the endpoint under different
scenarios:
Table 3-4 Dial-in String Rule for SIP Endpoints - Registered to Server
Scenario Dial-in String
Create this conference [email protected]
Create this conference and set:
Conference password: 1111
Chairperson password: 2222
[email protected]
Create this conference and invite:
Participant 1 - TEL URI/E.164：123
Participant 2 - TEL URI/E.164：321
1001*123*[email protected]
Create this conference, set the
above passwords. and invite the
above participants
1001$$1111$$2222*123*[email protected]
If the SIP server is not configured on the network, the format of the dial-in
string is as follows:
<Conference ID>[$$Conference password][$$Chairperson
password][*Participant's IP address or FQDN]@<RMX 1000 IP address>
Here, the character in the <> symbol is mandatory, and that in [ ] is optional.
For example:
RMX 1000 IP address: 172.22.30.40
ID of the conference to be created: 1001
The table below shows the strings dialed by the endpoint under different
scenarios:
Table 3-5 Dial-in String Rule for SIP Endpoints – Unregistered to Server
Scenario Dial-in String
Create this conference [email protected]
Create this conference and set:
Conference password: 1111
Chairperson password: 2222
[email protected]
Create this conference and invite:
Participant 1 - IP address:
172.22.30.1
Participant 2 - IP address:
172.22.30.2
1001*172.22.30.1*172.22.30.2@
172.22.30.40
Create this conference, set the
above passwords, and invite the
above participants
1001$$1111$$2222*172.22.30.1*172.22.30.2
@172.22.30.40