Philips BDP7100 - Manual (Page 20)

20
English
Set the audio connection
A Turn the audio system on.
B Set the audio system to the correct
external input.
On-screen menu navigation
Use the following buttons on the remote
control to open and navigate through the
on-screen menus.
Action Button
Go up or down in a
list cursor keys:
up/down
Move a cell in the
list cursor keys:
left/right
Confi rm a selection OK
Set the TV connection
Important Note:
After you have connected the BDP7100
to your TV and turn on for the fi rst time,
follow the instructions on the TV to
complete the initial setup for this player.
You will not be able to open the disc
tray unless the initial setup is completed.
A Connect the BDP7100 to your TV.
B Press 2 STANDBY-ON button to
turn on this player.
C Turn on your TV and set it to the
correct viewing channel. You should see
the { MENU LANGUAGE
SELECTION } appearing on the TV.
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Drücken Sie 4 für Deutsch
Premere 5 per Italiano
Druk op 6 voor Nederlands
Prima 7 para Português
MENU LANGUAGE SELECTION
Note:
To search for the correct viewing
channel, press the Channel Down button
on the TVs remote control repeatedly
(or AV, SELECT,
°
button) until you
see the signal from the player appears on
your TV.
D Use the number keys on the remote
control to select the preferred player
OSD (On Screen Display) language.
E Wait a few seconds for the player to
fi nish initialising the system.
The BDP7100 is now ready for use.
Set Up