Basic functions – Philips MCB146 User Manual
Page 11
11
English
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press STANDBY-ON 2 or SOURCE
(2 on the remote control).
➜
The system will switch to the last selected
source.
●
Press DISC, TUNER, DAB or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY-ON 2 (or 2 on the
remote control).
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
9
Adjusting volume and sound
1
Press VOL +/- to adjust volume.
➜
Display shows the volume level VOL and a
number from MIN 1-31 MAX.
2
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
if the DBB is activated.
3
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
MCB146_05_Eng_ASDA
4/2/10, 15:05
11