Listening to voice mail message(s) – Panasonic X-TSC14B User Manual

Page 37

Advertising
background image

Advanced Operation

37

Listening to Voice Mail Message(s)

After receiving a voice mail message, “

” icon will flash on the display.

To listen to your voice mail, perform the following steps.

1

Press

(VOICE\MAIL)

.

An icon of the line which has received
voice mail messages will flash.

2

Lift the handset or press

(SP-PHONE/HEADSET)

.

The unit is connected to the telephone line
and automatically dials the number.

3

Follow the pre-recorded instructions.

4

When finished, place the handset on the
cradle or press

(SP-PHONE/HEADSET)

.

The display will return to the standby mode.

The line which calls your voice mail service has priority over the line set using
the “Line Selection” (p. 41).

If “

” icon still flash after you have listened to your voice mail message(s),

press

(VOICE\MAIL)

, and then press and hold

(CLEAR)

. “

” icon will

disappear.

If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “

” icon may not flash.

If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone on the same line. If you use another phone to retrieve
messages, you have to dial your access number manually.

(SP-PHONE/HEADSET)

(VOICE\MAIL)

(FUNCTION/EXIT)

10

:

50

AM

11

/

23

x3

VOICE MAIL

LINE 2

PQQX12879ZA-BM03 01.3.7 3:52 PM y [ W

37

Advertising