Psion Teklogix NEO PX750 - Manual (Page 201)

Chapter 6: Peripheral Devices & Accessories
Desktop Docking Station Setup
Psion Teklogix NEO Hand-Held Computer User Manual 189
The desktop docking station is designed to charge the battery installed in NEO along with a
spare battery pack. It is equipped with a micro-USB port.
Figure 6.10 Back Of Desktop Docking Station
6.5.1 Desktop Docking Station Setup
Refer to instruction sheet PN 1081333 for a checklist of startup steps. You can find this
instruction sheet on Teknet. Go to www.psionteklogix.com. Tap on Teknet and enter you
user name and password. If you’re not already a member, you will be asked to register free
of charge.
6.5.2 Charging A Battery Installed In NEO
• Insert the DC power cable to the DC IN port on the desktop docking station. Plug the
pronged end of the cable into an AC outlet.
DC IN Socket
Micro-USB Port
Important: This docking station can only be used to charge Psion Teklogix approved
lithium-ion batteries.
Important: Before charging a battery, it is critical that you review the “NEO Hand-Held
Computer Regulatory & Warranty Guide, PN 8000175.