Installing the kws8000 on a wall, Installing the kws8000 on a wall –5, Wall mounting safety precautions – Polycom KIRK KWS8000 User Manual
Page 8
KWS8000 Installation
1–5
2
Before placing the unit, carefully turn it upside down and mount the four
rubber pads supplied in the package. One must be placed at each corner
of the bottom plate.
3
Place it on a clean, flat, horizontal surface.
Installing the KWS8000 on a Wall
Before you start installation take notice of the following safety precautions.
Wall Mounting Safety Precautions
• Ensure the wall quality is good enough for holding the unit. Avoid
high-porous surfaces, joints and similar.
• Never use countersunk screws.
• Leave at least 10 centimeter of free air above the unit for ventilation.
To Install the KWS8000 Using the Wall Hanger
For free hanging installations, you use the wall hanger.
1
Find a suitable spot on an even closed-textured surface. The unit should
be placed minimum 1 meter above ground surface and minimum 20
centimeter from any corner.
Figure 1-2
Wall hanger positioning