Pentax Optio T10 - Manual (Page 45)

Selecting a Shooting Mode
43
3
Tak
ing P
icture
s
Memo
• When Shooting mode is set to \ (Sport) or E (Pet), [Flash Mode] is set to
a (Flash Off). However, the flash mode can be changed.
• When Shooting mode is set to < (Flower), [Focus limiter] is set to Off, but
the setting can be changed.
• When Shooting mode is set to Y (Frame Composite), the number of
recorded pixels is fixed at h and cannot be changed.
1
In Capture mode, touch the LCD monitor.
The [Capture Toolbar] appears.
2
Touch the A (Shooting Mode)
icon.
• The icon of the currently selected shooting
mode appears in place of the A icon.
• The [Capture Palette] appears.
3
Touch the desired shooting mode
icon.
A guide display of the selected shooting
mode appears.
• To skip the guide display, double-touch the
icon. The shooting mode is selected and
the camera returns to Capture mode.
• Touch the arrow icons (qr) to advance to other shooting modes.
• Touch [Palette] to return to the [Capture Palette].
4
Touch [OK].
The shooting mode is selected and the camera returns to Capture mode.
5
Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Memo
You can set the display not to show the guide by default (p.135).
Capture Palette Capture Palette Capture Palette
Night Scene
Palette OK
Used for night
scenes. Use a
tripod, etc. to
prevent shaking
and use a flash
for portraits.