Philips HTS6520/93 - Manual (Page 44)

44
Note
Do not remove the CD-R or USB when •
software updating is in progress.
8
Disconnect the power cord for a few
seconds and connect again to reboot the
system.
Care
Caution
Never use solvents such as benzene, thinner, •
cleaners available commercially, or anti-static
sprays intended for discs.
Clean discs
Wipe the disc with a micro À bre cleaning cloth
from the centre to the edge in a straight line
movement.
Clean main unit screen
Wipe the screen surface with a micro À bre
cleaning cloth.
8 Additional
Information
Update software
To check for new updates, compare the current
software version of your Home Theater System
with the latest software version (if available) at
the Philips website.
1
Press SETUP .
2
Select [Preferences] > [Version Info.] ,
then press OK .
3
Write down the version number, then
press SETUP to exit the menu.
4
Go to www.philips.com/support to check
the latest software version available for
this Home Theater System.
5
If the latest software version is higher
than the software version of this Home
Theater System, download it and store
onto a CD-R or USB Á ash drive.
6
Insert the CD-R or USB Á ash drive to this
Home Theater System.
7
Press DISC or USB , then follow the
instruction on the TV to conÀ rm update
operation.
Once software update is complete,
»
this Home Theater System turns off to
standby automatically.
MP3/JPEG Display
DivX Subtitle
Password
Parental
Disc Menu
Preferences
PBC
Default
Version Info.
EN