Installation – Nady Systems MPM 8175 User Manual

Page 5

Advertising
background image

INSTALLATION

5

To ensure years of enjoyment from your NADY AUDIO MPM 8175, please read and understand this manual thoroughly before
using the unit.

INSPECTION

Your MPM 8175 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using
your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit.

(Note: Nady Systems is not responsible for shipping damage. If the unit is damaged, do not return to us, but notify your dealer and the
shipping company immediately to make a claim. Such claims must be made by the consignee in a timely manner.)

CONTENTS:

• Instruction manual

• MPM 8175 (verify that the unit’s serial number is same as shown on shipping carton)

• AC Power cord

• Warranty Card

POWER CONNECTION

The MPM 8175 has an internal power supply and is designed to operate from an external AC source. Power requirements for electri-
cal equipment differ from area to area. Be sure to confirm that the voltage selected by the voltage selector switch on the back panel is
proper for your area (120VAC/60 Hz or 230VAC/50Hz) per the information below:

Europe (except UK): 230V, 50Hz

UK and Australia: 240V, 50Hz

USA and Canada: 120V, 60 Hz

For other areas, please check with local authorities.


When ready to operate, plug the AC cord into the power source. Make sure that the unit is turned off before connecting to the AC
power source to avoid possible loud transients which can damage your speakers or your ears, especially when monitoring with head-
phones.

Advertising