Navman MCB 7270 - Manual (Page 11)

12 NAVMAN
MCB 7270 Marine CB 27 MHz Radio Operation Manual
2.3.6 Priority Channel Screens (Australia)
The left hand screen shows the radio receiving (Rx) on the marine (MB) channel band priority (PRI)
channel 88. The signal strength is at maximum, noise rejection mode (REJ) and local mode (LOC) are
selected.
The right hand screen shows the radio receiving on the land (CB) channel band priority (PRI) channel
09.
Priority channel 88 Priority channel 09
2.3.7 ALL SCAN Mode Screens
The left hand screen shows the radio in ALL SCAN mode (SCAN) for the marine (MB) channel band.
Noise rejection mode (REJ) and local mode (LOC) are selected.
The right hand screen shows the radio stopped in ALL SCAN mode (SCAN) to receive (Rx) on Channel
98 at the signal strength shown. The radio remains on this channel for 4 seconds and then resumes
scanning (unless you press SCAN to cancel the ALL SCAN mode and remain on that channel).
ALL SCAN mode Receiving in ALL SCAN mode
2.3.8 Locked Out and Unlocked Channel Screens
The left hand screen shows the radio in normal mode when a locked out channel has been selected.
The X symbol appears next to the channel number to show that the channel is locked out.
To unlock the channel, just press SKIP and the X symbol disappears (right hand screen).
Locked Out (Normal)
Unlocked (Normal)