Nikon COOLPIX S203 - Manual (Page 115)

103
Shooting Options: The Shooting Menu
S
h
oot
in
g, P
laybac
k
an
d Se
tu
p Me
nus
B
Notes on Face-Priority
• In Face priority, if the shutter-release button is pressed halfway when no faces are recognized, AF
area mode will be set to Auto.
• If no face is detected when the shutter-release button is pressed halfway in Portrait or Night
portrait scene mode, or smile mode, the camera will focus on the subject in the center focus area.
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When the subject is not looking directly at the camera
- When faces take up too much or too little of the frame
• The camera’s ability to detect faces depends on a variety of factors, including whether or not the
subject is facing the camera.
• In some rare cases, the subject may not be in focus despite the fact that the double border glows
green ( A 25). Should this occur, switch to A (auto) mode and set AF area mode to Manual or
Center, refocus on another subject positioned at the same distance from the camera as the actual
portrait subject, and use focus lock (
A 101).
• When pictures in which a face was detected during shooting are played back, the pictures will be
automatically rotated for playback display, according to the orientation of the face detected.
Q Distortion Control
Specify whether or not the distortion is corrected. Enabling distortion control
reduces the size of the frame.
At settings other than Off, the icon for the current setting is displayed in the
monitor (
A 6).
Set to A (auto) M d (Shooting menu) M Q Distortion control
On
Distortion at frame peripheries is corrected.
Off (default setting)
No distortion correction performed.