7-1 multi window displays – NorthStar Navigation Multi-Function Unit M84 User Manual

Page 17

Advertising
background image

Northstar M121/M84 Installation and Operation Manual

16

2-7-1 Multi window displays

The M121/M84 can show up to four windows
at once, for example Chart, Sonar, Gauges and
Video:

Adding a window to the display

Press

DISPLAY

, select Add window and select a

window to add. The M121/M84 automatically
rearranges the display to show the new
window.

Changing window size

1 Press

DISPLAY

and select Split ratio.

2 Press or to change the width of the

windows. If the M121/M84 is displaying three
or four windows, press or to change
the height of the windows.
Note: Some windows are fixed in size.

3 Press

ENTER

.

Deleting a window from the display

1 Press

until the window you want to

delete has a red border.

2 Press

DISPLAY

and select Delete window.

Exchanging two windows on the display

1 Press

until the first window has a red

border.

2 Press

DISPLAY

, select Replace and select the

second window.

The M121/M84 exchanges the two windows.

Replacing a window on the display

1 Press

until the window that you want

to replace has a red border.

2 Press

DISPLAY

, select Replace and select a new

window that is not currently visible.

Note

1 When some windows are small then not all

the data is shown.

2 Set up commonly used displays as favorites

and press

to switch between displays

(see section 2-7-2).

The active window

If there is more than one window displayed, the active window is indicated by a red border. To
change the active window to the next window, press

.

Pressing

MENU

will display the options menu for the active window.

Red border

Press

Press

Chart is active

Sonar is active

Advertising
This manual is related to the following products: